Home > HP Printer Parts > HP M607 M608 M609 Maintenance Kit
HP M607 M608 M609 Maintenance Kit
What is a Maintenance Kit?
Worn roller padding, paper dust and abrasive toner can reduce print quality and cause paper jams as well as premature wearing on gears. The Preventive Maintenance Kit contains the parts recommended by the OEM that should be changed periodically to prevent downtime of the printer.
How much are L0H24A-67901 M607 M608 M609 Maintenance Kits
The Standard M607 M608 M609 Maintenance Kit Contains:
-
1 Transfer Roller: RM2-6800
-
2 Separation Roller Assembly: RM2-6772
-
2 Pickup Rollers Assembly: RM2-1275
-
1 Fusing Assembly: RM2-1256
Specifications
Price:
UPC Code: 889894213532
Weight 4 lbs
Power 110 volt
Availability: In Stock
Supports Factory Warranty: Yes
Maintenance Kit Manufacture Part Numbers
-
L0H24-67901
-
L0H24A
-
HP L0H24A
For Use in the Following Printer Models
-
HP LaserJet Enterprise M607dn
-
HP LaserJet Enterprise M607n
-
HP LaserJet Enterprise M608dn
-
HP LaserJet Enterprise M608n
-
HP LaserJet Enterprise M608x
-
HP LaserJet Enterprise M609dh
-
HP LaserJet Enterprise M609dn
-
HP LaserJet Enterprise M609x
When Should a Maintenance Kit Be Replaced?
On the HP M607 M608 M609 Laser Printers the OEM recommends replacing the maintenance kit every 225,000 pages or as needed.
What Are The Different Types Of Maintenance Kits?
-
Original Equipment Manufacturer (Highest Price - Highest Quality) comes from the original equipment manufacturer. It may or may now be new.
-
Equivalent To New - (Competitive Price - Excellent Quality) Comes from a reputable manufacture that uses the OEM core and replaces worn components. Like new!
-
Aftermarket- (Moderate Price - Moderate Quality) Comes from Asian sources, It may or may now be new.
More Options
-
With OEM rollers- The rollers in the maintenance kit are OEM original equipment manufacturer. (Highest Price - Highest Quality)
-
With Aftermarket Rollers- The rollers in the maintenance kit are from an Asian importer. (Competitive Price - Excellent Quality)
Installation and Replacement Instructions
------------- WARNING: Printer Parts May Be Hot -------------
Turn the printer off, unplug it, and allow it to sit for 30 minutes before
performing these maintenance procedures. Removing or replacing parts when the printer is turned on will harm the device irrevocably.
Transfer Roller Removal and Replacement
1. Open rear door and locate the transfer roller on the transfer assembly.
2. Pinch the clips on the blue bushings at each end of the transfer roller.
3. Lift and remove the transfer roller from the transfer assembly.
4. Install the blue bushings onto the replacement transfer roller.
5. Install the replacement transfer roller, pressing down on the blue bushings to lock it in place.
Other Helpful Resources
CAUTION: Do not touch the surface of the transfer roller. Contact with skin can cause print quality problems.
Tray 2 Separation Roller Assembly & Pickup Roller Assembly Removal and Replacement
-
Remove the tray 2 cassette.
-
Open the rear door.
-
Lift the transfer assembly.
-
Grab the lower green tab on the left and lower the roller access cover.
-
Grab the separation roller assembly in the center, between the two arrows. Slide it to the left and remove it from the printer.
-
Pull down on the blue tab to unlock the pickup roller assembly.
-
Push the spring loaded blue lock post to the left until it locks in place.
-
Slide the pickup roller assembly to the left and remove it from the printer.
-
Install the replacement pickup roller assembly and slide it to the right. When doing this, the white plastic hook on top of the pickup roller assembly must fit into the metal hanger in the printer. If the roller appears to be hanging, remove the pickup roller assembly and reinstall it, ensuring the white plastic hook on top is properly seated.
-
Lift up on the tab on the spring loaded blue lock post to release it, securing the pickup roller assembly.
-
Lift the blue tab to further secure the pickup roller assembly.
-
Hook the white tab through the hole in the replacement separation roller assembly.
-
Slide the separation roller assembly to the right and onto the shaft, until it locks in place.
-
Close the rear door.
Fusing Assembly Removal and Replacement
-
Open the rear door and locate the fuser.
-
Grab the fuser handles, squeeze the blue triggers and pull the fuser from the rear of the printer.
-
Install replacement fuser.
-
Close the rear door.
The fuser contains circuitry that will reset the maintenance counter when powered on.
Frequently Ask Questions FAQ
What is Advance Exchange?
Advance Exchange is when you order the part or kit with the promise of returning the non-functional part from the machine as your replacement core. The benefit you is get a great discount and you help the environment.
What does a M607 M608 M609 fuser do?
The fuser is one of the primary imaging components inside of laser printers. The fuser is a Teflon coated roller or film that heats up to specified temperature. Using specific pressure from a roller and heat it bonds the toner from the drum and toner cartridge onto your sheet of paper.
I Dont Want To Install This Maintenance Kit. Can I Hire Someone Do it for me?
National Printer Service Dealer Network
More Troubleshooting Help
Solving Noise Issues After Replacing The New Fuser
Be certain that both sides of the fuser are firmly locked into the printer. Listen for the two locks to snap in when you install it. If the fuser is not secured, the printer may display a “50.3 FUSER ERROR” message or you may hear a grinding noise. In either of these cases, remove the fuser and reinstall it making sure that both sides are locked in place.
Helpful Resources
-
Troubleshooting Printer Parts With The Halfway Test Or Stop Test
-
Simple Steps To Isolating Printer Image Defects And Free Printable Tools
Buy It Here, Get Support Here!
REVIEWS - Rating: 4.6
★★★★★
By HP User
Great videos ..very helpful Thanks you!
★★★★★
By HP User
Could use more photos!
★★★★★
By HP User
Troubleshooting image defects rulers are very useful
All Videos
