HP Printer Parts Technical Support Blog

Scroll down to view articles and results.

Please consider help supporting us so we can continue helping you.

Search

Legacy Lexmark Laser Printer Maintenance Kit Page Count Reset Procedure Instructions

Updated: Apr 14, 2019

How to reset page counts on Lexmark Laser Printers

Legacy Lexmark Laser Printer Maintenance Kit Page Count Reset Procedure Instructions

Optra S &SE Hold down the [GO] and [Return] buttons and power on the printer, continue to hold these keys until “Performing Self Test” appears in the display. Once this appears, release the buttons. This will allow you to access the “Diagnostics Menu”, the printer may display “80 Scheduled Maintenance.” Press the [Go] Button to bypass this and this should get you in to the “Diagnostic Mode”. Using the arrow keys, scroll to “Printer Setup” menu and press [Select]. Then using the arrow keys scroll to “Reset Maintenance Count” (“Maintenance Count Value” only allows you to view the page count). To exit Diagnostics Mode just cycle the power.


Optra T610/12/14/16 Lexmark T520/22, T620/22, T630/32/34 Press and hold down the [Select] and [Return] keys while powering on the printer, hold these buttons until the display reads “Performing Self Test.” If the display reads “80 Schedules Maintenance, press the [Go] to continue past this message and access the Configuration Menu. Press the menu button until the display reads “Reset Maint Cnt” on the second line of the display and press the [Select] button. The top line of the display should now read “Reset Maint Cnt” and the second line will read “Reset” and press the [Select] button. This will reset the counter. To exit out of the “Configuration Mode” cycle the power.


Lexmark T640/42/44 Press and hold the [Checkmark] and the [right arrow] button while powering on the printer. When “Performing Self Test” appears in the display, release the buttons. The “Config Menu” will appear in the display. Use the down arrow to scroll through this menu until you see “Reset Maint Cnt” and press the [Checkmark]. The display will read “Reset.” When this happens press the [Checkmark] button again, this will reset the maintenance counter. To exit out of this menu, just cycle the power on the printer.


Other Helpful Resources

Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts. The company's, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years.  Visit us at http://www.metrofuser.com

Youtube  LinkedIn  Facebook  Twitter

Metrofuser Technology Center

475 Division Street Elizabeth NJ 07201

© 2020 Copyright Metrofuser llc Privacy Policy Models   Emergency  Plum Benefits

 All trademarks referenced are the property of their respective holders and are used only to identify product compatibility. These products are not sponsored, affiliated with, manufactured by or distributed by the named trademark holders.  All model designations are for compatibility purposes only. Search Terms