Home > HP Printer Parts  > HP M607 M608 M609 Maintenance Kit

HP M607 M608 M609 Maintenance Kit

What is a Maintenance Kit? 

Worn roller padding, paper dust and abrasive toner can reduce print quality and cause paper jams as well as premature wearing on gears. The Preventive Maintenance Kit contains the parts recommended by the OEM that should be changed periodically to prevent downtime of the printer. 

 

The Standard M607 M608 M609 Maintenance Kit Contains:

  • 1 Transfer Roller: RM2-6800

  • 2 Separation Roller Assembly: RM2-6722

  • 2 Pickup Rollers Assembly: RM2-1275

  • 1 Fusing Assembly: RM2-1256

Specifications

Price: 

UPC Code: 889894213532 

Weight 4 lbs

Power 110 volt

Availability: In Stock

Supports Factory Warranty: Yes

Maintenance Kit Manufacture Part Numbers

  • L0H24-67901

  • L0H24A

  • HP L0H24A

For Use in the Following Printer Models

  • HP LaserJet Enterprise M607dn

  • HP LaserJet Enterprise M607n

  • HP LaserJet Enterprise M608dn

  • HP LaserJet Enterprise M608n

  • HP LaserJet Enterprise M608x

  • HP LaserJet Enterprise M609dh

  • HP LaserJet Enterprise M609dn

  • HP LaserJet Enterprise M609x

When Should a Maintenance Kit Be Replaced?

On the HP M607 M608 M609 Laser Printers the OEM recommends replacing the maintenance kit every 225,000 pages or as needed. 

 

What Are The Different Types Of Maintenance Kits?

  • Original Equipment Manufacturer (Highest PriceHighest Quality) comes from the original equipment manufacturer. It may or may now be new.

  • Equivalent To New - (Competitive Price - Excellent Quality) Comes from a reputable manufacture that uses the OEM core and replaces worn components. Like new!

  • Aftermarket- (Moderate Price - Moderate Quality) Comes from Asian sources, It may or may now be new.

 

More Options

  • With OEM rollers- The rollers in the maintenance kit are OEM original equipment manufacturer. (Highest PriceHighest Quality)

  • With Aftermarket Rollers- The rollers in the maintenance kit are from an  Asian importer. (Competitive Price - Excellent Quality) 

Installation and Replacement Instructions

 

------------- WARNING: Printer Parts May Be Hot -------------
Turn the printer off, unplug it, and allow it to sit for 30 minutes before

performing these maintenance procedures. Removing or replacing parts when the printer is turned on will harm the device irrevocably. 

Transfer Roller Removal and Replacement

1. Open rear door and locate the transfer roller on the transfer assembly.

2. Pinch the clips on the blue bushings at each end of the transfer roller.

3. Lift and remove the transfer roller from the transfer assembly.

4. Install the blue bushings onto the replacement transfer roller.

5. Install the replacement transfer roller, pressing down on the blue bushings to lock it in place.

Other Helpful Resources

 

CAUTION: Do not touch the surface of the transfer roller. Contact with skin can cause print quality problems.

Tray 2 Separation Roller Assembly & Pickup Roller Assembly Removal and Replacement

  1. Remove the tray 2 cassette.

  2. Open the rear door.

  3. Lift the transfer assembly.

  4. Grab the lower green tab on the left and lower the roller access cover.

  5. Grab the separation roller assembly in the center, between the two arrows. Slide it to the left and remove it from the printer.

  6. Pull down on the blue tab to unlock the pickup roller assembly.

  7. Push the spring loaded blue lock post to the left until it locks in place.

  8. Slide the pickup roller assembly to the left and remove it from the printer.

  9. Install the replacement pickup roller assembly and slide it to the right. When doing this, the white plastic hook on top of the pickup roller assembly must fit into the metal hanger in the printer. If the roller appears to be hanging, remove the pickup roller assembly and reinstall it, ensuring the white plastic hook on top is propery seated.

  10. Lift up on the tab on the spring loaded blue lock post to release it, securing the pickup roller assembly.

  11. Lift the blue tab to further secure the pickup roller assembly.

  12. Hook the white tab through the hole in the replacement separation roller assembly.

  13. Slide the separation roller assembly to the right and onto the shaft, until it locks in place.

  14. Close the rear door.

Fusing Assembly Removal and Replacement 

Watch Video

  1. Open the rear door and locate the fuser.

  2. Grab the fuser handles, squeeze the blue triggers and pull the fuser from the rear of the printer.

  3. Install replacement fuser.

  4. Close the rear door.

The fuser contains circuitry that will reset the maintenance counter when powered on.

 

Frequently Ask Questions FAQ

What is Advance Exchange?

Advance Exchange is when you order the part or kit with the promise of returning the non-functional part from the machine as your replacement core. The benefit you is get a great discount and you help the environment.

What does a M607 M608 M609 fuser do?

The fuser is one of the primary imaging components inside of laser printers. The fuser is a Teflon coated roller or film that heats up to specified temperature. Using specific pressure from a roller and heat it bonds the toner from the drum and toner cartridge onto your sheet of paper.

I Dont Want To Install This Maintenance Kit. Can I Hire Someone Do it for me?

National Printer Service Dealer Network

More Troubleshooting Help

Solving Noise Issues After Replacing The New Fuser

Be certain that both sides of the fuser are firmly locked into the printer. Listen for the two locks to snap in when you install it. If the fuser is not secured, the printer may display a “50.3 FUSER ERROR” message or you may hear a grinding noise. In either of these cases, remove the fuser and reinstall it making sure that both sides are locked in place.

Helpful Resources

Buy It Here, Get Support Here!

REVIEWS - Rating: 4.6

★★★★★

By HP User

Great videos ..very helpful Thanks you! 

★★★★★

By HP User

Could use more photos!

★★★★★

By HP User

Troubleshooting image defects rulers are very useful

Rate These Instructions

Youtube  LinkedIn  Facebook  Twitter

Metrofuser Technology Center

475 Division Street Elizabeth NJ 07201

© 2019 Copyright Metrofuser llc Privacy Policy Models   Emergency  Plum Benefits

 All trademarks referenced are the property of their respective holders and are used only to identify product compatibility. These products are not sponsored, affiliated with, manufactured by or distributed by the named trademark holders.  All model designations are for compatibility purposes only. Search Terms