CB388A P4014 P4015 P4515 Maintenance Kit CB388-67903

 

CB388A P4014 P4015 P4515 Maintenance Kit Contents

(1) Fuser Unit CB506-67901
(1) Transfer Roller CB506-67903
(10) Feed/Separation Rollers RM1-0037

 

Instructions

 

Common error codes that replacing the fuser will fix are:

50.11 fuser. error, 50.1 fuser error, 50.2 fuser error, 50.3 fuser error, 50.4, fuser error, 50.5 fuser error, 50.7 fuser error, 50.8 fuser error, 50.9 fuser error. "Replace Fuser" Error

 

Specs

  • Power: 110v
  • Original Mfr/Compatible : Compatible
  • Service Level: Exchange
  • Alternative Description : Fixing Assembly
  • Condition : Equivalent To New
  • Shipping Weight : 3 lb 7 oz
  • Shipping Dimensions : 15.6” x 8.8” x 5.2”
  • Country of Origin : USA
  • Machine Section : Fuser 
  • UPC Code :  845282077865
  • Alternate Manufacturer part numbers: HP CB506-67901, RM1-4554-000CN
  • Print Yield 225,000 pages

 

Fits these models:

HP LaserJet P4014
HP LaserJet P4014dn
HP LaserJet P4014n
HP LaserJet P4015dn
HP LaserJet P4015n
HP LaserJet P4015tn
HP LaserJet P4015x
HP LaserJet P4515n
HP LaserJet P4515tn
HP LaserJet P4515x
HP LaserJet P4515xm

 

Other Helpful Resources

 

Features

  • In Stock
  • Same day shipping if ordered by 5 PM EST.
  • Free U.S. based technical support from a 10 year veteran printer technician.
  • Multiple warehouses across the country for fast delivery.
  • 100% Positive feedback on Amazon and Ebay!
  • Our parts are fully supported by the original equipment warranty
  • 100% quality and satisfaction guarantee for 6 months
  • Made In the USA

CB388A P4014 P4015 P4515 Maintenance Kit

SKU: CB388A-RE
Brand
Category
  • BRAND

    HP
  • Service Notes

    Service Note for HP LaserJet P4014 P4015 P4515 Fuser Assembly Replacement

     

    DO NOT INSTALL OR REMOVE FUSER BEFORE TURNING POWER OFF. Failure to power down before installing or removing fuser will void warranty 

    Your HP P4014/P4015/P4515 fuser has been built to the highest quality standards. If you are experiencing problems with this fuser (jams, noises, poor print quality, etc.), please observe the following:

     

    If the fusers sleeve does not spin when you manually turn the gear, please do not assume that the fuser will not run in the printer. At room temperature, the grease applied inside the sleeve thickens and may actually prevent the sleeve from spinning. When the fuser is installed and run in the printer, the grease will heat up and attain proper viscosity.

     

    If you continue to experience paper jams after replacing the fuser, replace the feed/separation separation rollers (one in the paper tray and two in the bottom of the printer) and three MP tray rollers. Ensure that the paper you are printing on is within the specifications allowed by HP. For tray one/MP tray, the paper must be between 16lb and 54lb. For trays two to six, the paper must be between 16lb and 36lb.

     

     

    If your printer’s motors and fans run continually without printing any pages, and with “PROCESSING JOB” displayed on the control panel, along with a possible “41.08 ERROR”, the printer’s firmware may need to be upgraded. Firmware versions lower than 04.060.7 will exhibit this problem and can be resolved by visiting http://www8.hp.com/us/en/support-drivers.html and downloading and

    installing the current firmware revision. 

     

    HP P4014 4015 4515 Firmware Upgrade Instructions

     

    Other Symptoms Of Outdated Firmware

    • Jamming without cause
    • # 49.xx errors
    • Printer stays in "Processing Job" and is slow to print or never actually prints
    • Poor fusing/ poor images quality

     

    Be certain that both sides of the fuser are firmly locked into the printer. Listen for the two locks to snap in when you install it. If the fuser is not secured, the printer may display a “50.3 FUSER ERROR” message or you may hear a grinding noise. In either of these cases, remove the fuser and reinstall it making sure that both sides are locked in place.

Your Price
Qty
Get A Quote!
CB388A-RE
Instant Answer -Call 908-245-2100
or email to check price & availability

Youtube  LinkedIn  Facebook  Twitter

Metrofuser Technology Center

475 Division Street Elizabeth NJ 07201

© 2019 Copyright Metrofuser llc Privacy Policy Models   Emergency  Plum Benefits

 All trademarks referenced are the property of their respective holders and are used only to identify product compatibility. These products are not sponsored, affiliated with, manufactured by or distributed by the named trademark holders.  All model designations are for compatibility purposes only. Search Terms