HP Printer Parts Technical Support Blog

Scroll down to view articles and results.

Please consider help supporting us so we can continue helping you.

Search

HP M601 M602 M603 Fuser & Maintenance Kit Replacement Instructions part number CF064-67901

Updated: Sep 12, 2019

Today we will be reviewing the removal and installation process for the HP M601 M602 M603 Fuser & Maintenance Kit Replacement Instructions part number CF064-67901


Search For Parts


Kit Contents:

1 Transfer Roller: RM1-0699

4 Feed/Separation: Rollers RM1-0037

2 Pickup Rollers: RM1-0036

1 Fusing Assembly: RM1-8395


Repair Notes:

  • The Page count Reset instructions will be located in the comments of the video or blog page so check below.

  • 220,000 page yield

  • This fuser and kit is available at in an number of different options at metrofuser


Thanks for watching. If you would like to see more of these videos hit like and subscribe..Visit on Metrofuser's Youtube channel or http://www.metrofuser.com


HP M601 M602 M603 Maintenance Kit Replacement Instructions

This printer maintenance kit provides you with the most commonly used parts that wear. Replacing these worn parts will allow for maximum paper feed along with quality print performance.


------------- WARNING: Printer Parts May Be Hot --------------

Turn the printer off, unplug it, and allow it to sit for 30 minutes before performing these maintenance procedures.


Transfer Roller Removal and Replacement


1. Open toner access door and tray 1.

2. Remove toner cartridge.

3. Lift the gear (left side) of the transfer roller up.

4. Slide to the left and remove.

5. Slide right side of replacement roller into right bushing.

6. Align left side collar making sure the open end is face down and push in.

CAUTION: Do not touch the surface of the transfer roller. Contact with skin can cause print quality problems..

Review of The HP M601 M602 M603 Printer Fuser Maintenance Kit CF064-67901 RM1-8395 CE988-67914.


M601 M602 M603 Tray 2 Feed and Separation Roller Removal and Replacement


1. Remove the tray from the printer.

2. On the tray, lift the roller cover next to the roller.

3. Pinch the blue tab and slide the roller off the shaft.

4. Slide new roller on making sure the tab locks.

5. Locate the feed roller in the top of the tray cavity.

6. Repeat steps 3 and 4.

NOTE: The removal and replacement process are the same for the feed and separation rollers on tray 3 and the 1500

sheet feeder.


M601 M602 M603 Fusing Assembly Removal and Replacement


1. Open rear output bin/face up tray.

2. Remove output bin from printer.

a.) Locate the left side hinge pin (there is a finger notch) squeeze the left hinge pin to the right to

release it from its mounting hole.

3. Slide the output bin to the left to remove from printer.

4. Pinch the blue tabs on the fuser and pull fuser out of printer.

5. Push the new fuser into the printer making sure both blue tabs lock.

6. Install the rear output bin/face up tray and check for proper operation.


M601 M602 M603 Resetting the Maintenance Count


1. At the control panel, press the Home () button.

2. Use the down arrow button () to select ‘ADMINISTRATION’ then press the OK button.

3. Use the down arrow button to select ‘MANAGE SUPPLIES’ then press the OK button.

4. Use the down arrow button to select ‘RESET SUPPLIES’ then press the OK button.

5. Use the down arrow button to select ‘NEW MAINTENANCE KIT’ then press the OK button.

6. Use the down arrow button to select ‘YES’ then press the OK button.

7. The display should show ‘SETTINGS WERE SAVED SUCCESSFULLY’.

8. Print a configuration page. Ensure the ‘Pages since last maintenance’ entry is set to zero.


Other Helpful Resources


Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts. The company's, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years. 

Youtube  LinkedIn  Facebook  Twitter

Metrofuser Technology Center

475 Division Street Elizabeth NJ 07201

© 2020 Copyright Metrofuser llc Privacy Policy Models   Emergency  Plum Benefits

 All trademarks referenced are the property of their respective holders and are used only to identify product compatibility. These products are not sponsored, affiliated with, manufactured by or distributed by the named trademark holders.  All model designations are for compatibility purposes only. Search Terms