|
KEYWORD |
PART NUMBER |
DESCRIPTION |
|
Bracket |
RC1-3339-000CN |
Fan rod -
Metal rod that mounts against Fan 2 on right side of printer - Used for
noise reduction of Fan 2 |
|
Bushing |
RC1-0136-000CN |
Roller
bushing - Bushing that supports middle of paper delivery roller |
|
RC1-0206-000CN |
Bushing -
On right side of paper pickup drive assembly |
|
RC1-0264-000CN |
Feed
roller shaft bushing - Bushing on right side of printer that supports
the feed roller shaft. |
|
Cable |
RG1-4204-000CN |
Size
sensor cable - Cable that connects to paper size sensors in 500 sheet
feeder assembly |
|
RM1-1218-000CN |
A/C input
connector/cable - 120VAC input connector to J1 power supply connector |
|
RM1-1219-000CN |
A/C input
connector/cable - 220VAC input connector to J1 power supply connector |
|
RM1-1190-000CN |
Control
panel cable |
|
RM1-1193-000CN |
Envelope
feeder cable - From DC Controller board to envelope feeder connector -
Includes envelope feeder connector |
|
RG1-4241-000CN |
Front door
sensor cable - Connects between the sensor in the feeder lifter drive
assembly and the feeder control board |
|
RG1-4239-000CN |
Interface
cable assembly - Connects between the 6-pin interface connector and the
feeder control board |
|
RM1-1198-000CN |
Laser
cable - Connects between DC Controller board and laser scanner unit -
J145 to J83 |
|
RG1-4240-000CN |
Media size
sensor cable assembly - Connects between the paper size sensor assembly
and the feeder control board |
|
RM1-1192-000CN |
Power
cable for Tray 3 paper feeder - Black connector with 42mm six wire cable
to white connector |
|
RK2-0290-000CN |
Ribbon
cable - Between DC Controller board (J80) and power supply board (J50) |
|
RK2-0288-000CN |
Ribbon
cable - Between DC Controller board (J81) and power supply board (J51) |
|
RG1-4213-000CN |
Top Cover
cable - From top cover microswitch (SW101) to DC Controller board |
|
RM1-1189-000CN |
Top bin
full sensor cable |
|
RG1-4221-000CN |
Tray 2
paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 |
|
Cable (Interface) |
C2950A |
IEEE 1284
Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin
Centronics (M) connector (type B) - 2.0m (6.6ft) long |
|
C2951A |
IEEE-1284
Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin
Centronics (M) connector (type B) - 3.0m (9.8ft) long |
|
C6518A |
Universal
Serial Bus (USB) interface cable - Type 'A' connector to type 'B'
connector - 2.0m (6.6ft) long |
|
Cartridge |
Q5942-67901 |
Black
Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 10,000
pages |
|
Q5942A |
Black
Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 10,000
pages |
|
Q5942-67902 |
Black
Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000
pages |
|
Q5942X |
Black
Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 20,000
pages |
|
Clip |
XD9-0234-000CN |
E-Type
retainer ring |
|
XD9-0232-000CN |
E-ring
keeper - Attaches to drive end of registration roller to secure cluster
gear |
|
Clutch |
RK2-0349-000CN |
Paper feed
assembly clutch - Electro mechanical clutch that connects to the white
30 tooth gear - CL 101 |
|
Connector |
RM1-0042-000CN |
Accessory
cable/connector - Connector for stacker and stacker/stapler accessory at
top right rear of printer |
|
VS1-7333-006CN |
Duplexer
connector - Connector on power supply assembly for duplexer |
|
Cover |
RC1-0500-020CN |
Cover
plate - Plastic cover on right front corner of 500 sheet feeder tray -
Covers removable tray number designator plate |
|
RM1-0273-070CN |
Front
cover (or door) - Provides access to load paper in the 1,500 sheet paper
feeder assembly |
|
RM1-1080-000CN |
Cartridge
access door cover for LaserJet 4250/4350 family |
|
RC1-0288-000CN |
Formatter
board cover |
|
RC1-0320-000CN |
Envelope
cover - Plastic piece above Tray 1 pickup roller |
|
RC1-0662-000CN |
Left side
cover assembly - For the 1,500 sheet paper feeder assembly |
|
RC1-3280-000CN |
Duplexer
slot cover - Removable lower rear cover for Duplexer attachment slot |
|
RC1-0487-020CN |
Left side
cover for 500 sheet paper feeder assembly |
|
RC1-0663-000CN |
Rear cover
assembly - Box type cover for the rear of the 1,500 sheet paper feeder
assembly |
|
RM1-0050-050CN |
Front
cover - Drop down Tray 1 |
|
RC1-0019-000CN |
Inner
right front cover |
|
RC1-0661-000CN |
Right side
cover assembly - For the 1,500 sheet paper feeder assembly |
|
RC1-3282-000CN |
Lower rear
cover - Covers rear of standard 500 sheet tray |
|
RC1-0509-000CN |
Rear cover
- Rear plastic cover for 500 sheet paper feeder |
|
RM1-1077-000CN |
Left side
cover panel |
|
RC1-0488-020CN |
Right side
cover for 500 sheet paper feeder assembly |
|
RM1-0027-020CN |
Rear
output tray assembly - Includes upper rear paper output tray and cover |
|
RC1-0486-020CN |
Upper
front cover - Small piece of plastic on top front edge of 500 sheet
feeder |
|
RM1-1076-000CN |
Right side
cover assembly |
|
RM1-1081-000CN |
Top cover
assembly - Top paper output tray and top of printer |
|
RC1-0289-000CN |
Top rear
cover of printer - Removes for Stapler/Stacker installation |
|
Damper |
RC1-0330-020CN |
Solenoid
damper - Locate on right side of Tray 2 guide - Works with kicker to
dampen Tray 2 pickup solenoid on right side of tray guide |
|
Drive |
J6073-69021 |
High
performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO)
slots |
|
Drive (Product) |
J6073G |
High
performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO)
slots |
|
J6073A |
High
performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO)
slots |
|
Drive Assembly |
RC1-0200-020CN |
Lifter
drive assembly support - Tray 2 paper pickup lifter drive support
assembly |
|
RM1-1094-000CN |
Lifter
drive assembly for 500 sheet feeder |
|
RM1-1136-000CN |
Lifter
drive assembly for 1500 sheet feeder |
|
RM1-0056-040CN |
Paper
pickup drive assembly - Gear assembly on right front side of 500 sheet
paper feeder assembly |
|
RM1-1066-000CN |
Main drive
assembly - Main gear assembly on right side of printer |
|
RM1-1133-020CN |
Paper
pickup roller drive assembly for 1500 sheet feeder |
|
Duct |
RC1-3338-000CN |
Fan duct -
Air duct and fan mount for Fan 2 - Fan duct on right side of printer |
|
Duplexer |
Q2439-67902 |
Automatic
duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
|
Q2439B |
Automatic
duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
Q2439-69002
Q2439-67902 |
Automatic
duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
|
Envelope Feeder |
Q2438B |
75 sheet
envelope feeder |
|
Q2438-67902 |
Envelope
feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot
on the front of the printer |
|
Fan |
RK2-0278-000CN |
Cooling
fan on left side of printer - FN101 |
|
RK2-0280-000CN |
Cooling
fan on right side of printer - Print cartridge fan - FN103 |
|
Flag |
RC1-0060-030CN |
Paper feed
sensor flag for Tray 1 |
|
RL1-0015-000CN |
Kicker
assembly - Mounts to right side of the printer and is connected to the
right side guide - Senses when the paper cassette is inserted into the
printer |
|
Foot |
RB1-8107-000CN |
Rubber
foot - Replacement rubber foot for the bottom of the printer (four used) |
|
Fusing Assembly |
RM1-1082-070CN |
Fuser
assembly - For LaserJet 4250/4350 series - 110 VAC |
|
RM1-1083-070CN |
Fuser
assembly - For LaserJet 4250/4350 series - 220 VAC |
|
Gear |
RU5-0015-000CN |
14T/30T
cluster gear - Attaches to drive end of registration roller |
|
RU5-0088-000CN |
18 tooth
gear - Located on right side of printer in the 500 sheet tray paper
pickup assembly |
|
RU5-0045-020CN |
18 tooth
gear - Located on right side of printer in the Tray 2 paper pickup
assembly |
|
RC1-0371-000CN |
23 Gear -
Gear that drives paper feed roller - Attaches to feed roller shaft |
|
RU5-0050-000CN |
30 tooth
gear - Black plastic gear that attaches to paper feed assembly clutch |
|
RU5-0040-000CN |
Gear - 23
tooth gear in lower front section of pickup drive assembly |
|
RL1-0264-000CN |
Gear -
Gear with attached shaft - Driven by pickup drive assembly on right
front of printer |
|
Gear Assembly |
RM1-0002-030CN |
Duplexing
pendulum assembly - Gear assembly that transfers power from main motor
to run duplexing capability |
|
RM1-0286-000CN |
Paper
level sensor gear assembly |
|
Guard |
RC1-0242-000CN |
Inner
right side edge guard - Small plastic guard that protects wires inside
chassis on right side of printer. |
|
RC1-0247-000CN |
Right side
edge guard - Small plastic guard that protects wires - Mounts on right
outer side of printer chassis. |
|
Guide |
RC1-0273-000CN |
Paper feed
belt guide for left side |
|
RC1-0386-000CN |
Connecting
cable guide - Routes and protects all cables running from top portion of
printer to the DC controller board |
|
RC1-0270-020CN |
DC
Controller board cable guide |
|
RC1-0274-020CN |
Paper feed
belt guide for right side |
|
RC1-0153-030CN |
Right side
Tray 2 paper cassette guide |
|
RC1-3340-000CN |
DC
Controller board cable guide |
|
RC1-0269-020CN |
DC
Controller flat cable guide |
|
RC1-0385-000CN |
Guide for
scanner cable 2 |
|
RC1-0243-000CN |
Right
front power supply guide - Attaches to right side of printer chassis |
|
RC1-0340-020CN |
Scanner
cable guide - Mounts below accessory interface connector cable on right
side of chassis |
|
RC1-0244-000CN |
Support
guide - Supports right rear side of power supply board |
|
Holder |
RC1-0208-030CN |
Paper
sensor flag holder |
|
RC1-0211-000CN |
Paper
pickup arm - Pickup and feed roller holder for Tray 2 paper pickup
assembly |
|
RC1-0343-020CN |
Thermistor
holder - Metal outside half of thermistor holder |
|
RC1-3352-000CN |
Paper
pickup arm - Pickup and feed roller holder for Tray 2 paper pickup
assembly |
|
RC1-0212-000CN |
Paper
pickup arm holder - Holder for pickup roller shaft |
|
RC1-0342-020CN |
Thermistor
holder - Plastic inside half of thermistor holder |
|
Interface |
J7934-69001 |
JetDirect
620n internal print server - 10BaseT and 100BaseTX LAN interface board -
Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
Interface (Product) |
J3258G |
HP
JetDirect 170X external print server module (10Base-T) - Connects
between printer parallel port and LAN network |
|
J6060A |
HP Jet
Direct 300X external print server module (Three pack) (10Base-T and
100Base-T) - Connects between printer parallel port and LAN network -
Three Pack |
|
J3258A |
HP
JetDirect 170X external print server |
|
J7942G |
HP
JetDirect en3700 external print server - Fast Ethernet Internet
connector for sharing peripherals with USB ports, in a 10/100 TX LAN
environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX
connector - Includes software and power module |
|
J6035C |
HP
JetDirect 175X external print server - Has on 4-pin USB connector and
one RJ-45 LAN connector - Connects to the printer via the USB port and
the network via the LAN port |
|
J7942A |
HP
JetDirect en3700 external print server - Fast Ethernet Internet
connector for sharing peripherals with USB ports, in a 10/100 TX LAN
environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX
connector - Includes software and power module |
|
J6035A |
HP
JetDirect 175X external print server - Has one 4-pin USB connector and
one RJ-45 LAN connector - Connects to the printer via the USB port and
the network via the LAN port |
|
J7951G |
HP
Jetdirect ew2400 802.11g wireless print server module |
|
J6061A |
HP
JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server -
Connects to printer using Universal Serial Bus (USB) cable |
|
J7951A |
HP
Jetdirect ew2400 802.11g wireless print server module |
|
J7934G |
HP
JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN
interface board - Plugs into peripheral EIO slot - Has an RJ-45
connector - Comes with software on CD-ROM and manual on CD-ROM |
|
J7934A |
HP
JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN
interface board - Plugs into peripheral EIO slot - Has an RJ-45
connector - Comes with software on CD-ROM and manual on CD-ROM |
|
J6058A |
HP
JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server -
Plugs into peripheral EIO slot |
|
J7960A |
HP
Jetdirect 625n internal ethernet print server - Provides 10BaseT,
100BaseTX, or 1000BaseT interface for products with an EIO port |
|
J7960G |
HP
Jetdirect 625n internal ethernet print server - Provides 10BaseT,
100BaseTX, or 1000BaseT interface for products with an EIO port |
|
J6072A |
HP bt1300
Bluetooth wireless printer adapter - Allows for wireless printing from
Bluetooth enabled PCs, PDAs, phones, and cameras - Connects to either
the parallel or USB port on the printer - Includes the power module and
power cord |
|
Laser/Scanner |
RM1-1067-030CN |
Laser/scanner assembly for 4250/4350 series LaserJet printers |
|
Lifter |
5851-2766 |
Swing
plate assembly - For Tray 2 paper lift assembly - Located between the
main gear assembly and the fuser, just above the power supply - Contains
swing plate assembly and new fuser pressure release gear |
|
RM1-1074-000CN |
Tray 2
lifter drive assembly - Provides lift support for paper tray |
|
Maintenance Kit |
Q5421A |
HP
LaserJet 4250/4350 maintenance kit - (120V) - Includes fusing assembly,
separation roller, transfer roller, feed roller for Tray 1, two feed
rollers for 500 sheet tray and installation instructions |
|
Q5422-67903 |
HP
LaserJet 4250/4350 maintenance kit - (220V) - Includes fusing assembly,
separation roller, transfer roller, feed roller for Tray 1, two feed
rollers for 500 sheet tray and installation instructions |
|
Q5421-67903 |
HP
LaserJet 4250/4350 maintenance kit - 120VAC - Includes fusing assembly,
separation roller, transfer roller, feed roller for Tray 1, two feed
rollers for 500 sheet tray and installation instructions |
|
Manual |
Q5400-90932 |
LaserJet
4200/4250/4300/4350 combined service manual - English only |
|
Memory (DIMM) |
Q2626-67951 |
128MB,
100-pin, DDR SDRAM DIMM memory module - Used to add flash memory-based
accessory fonts, macros, and patterns |
|
Q2627-67951 |
HP 256MB
100-pin DDR DIMM - Used to add flash memory-based accessory fonts,
macros, and patterns |
|
Q6007-67951 |
HP 48MB
100-pin DDR DIMM - Used to add flash memory-based accessory fonts,
macros, and patterns |
|
Q2625-67951 |
HP 64MB
100-pin DDR DIMM - Used to add flash memory-based accessory fonts,
macros, and patterns |
|
Q6009-67951 |
HP 96MB
100-pin DDR DIMM - Used to add flash memory-based accessory fonts,
macros, and patterns |
|
Motor |
RH7-1603-020CN |
Motor -
Stepper motor in 1500 sheet feeder assembly |
|
RK2-0272-000CN |
Main motor
- M101 |
|
RK2-0274-000CN |
Toner
cartridge motor - Motor on front right side of printer (M102) |
|
Mount |
RL1-0013-000CN |
Swing
plate - Pivot mount for pickup roller shaft |
|
Nameplate/Logo |
Q5406-67911 |
LaserJet
4250 Nameplate kit - Includes nameplates for LaserJet 4250/n, tn, dtn,
dtnsl and HP logo jewel. |
|
7121-8044 |
Logo
Emblem HP Jewel No.5 |
|
Overlay |
RC1-3356-000CN |
Control
panel overlay - English |
|
PC Board |
RG1-4374-000CN |
1500 sheet
feeder assembly PC board |
|
RM1-1108-060CN |
DC
controller board - DC Controller for LaserJet 4250/4350 series |
Q3652-69005
Q3652-67905 |
Formatter
board assembly - 4240/4250/4350 network capable models only |
|
PC Board (Interface) |
J7934-61001 |
JetDirect
620n internal print server - 10BaseT and 100BaseTX LAN interface board -
Plugs into peripheral EIO slot - Has an RJ-45 connector |
|
Pad |
RL1-0007-000CN |
Tray 1
paper separation pad |
|
Paper Feeder |
Q2444B |
1500 sheet
high capacity paper input tray |
|
Q2440B |
500-sheet
paper feeder and tray/cassette - This is the assembly frame and tray
that the printer sits on top of |
|
Q2440-69003 |
500-sheet
paper feeder and tray/cassette - This is the assembly frame and tray
that the printer sits on top of |
|
Paper Stacker |
Q2443-67908 |
500 sheet
stapler stacker paper output assembly |
|
Q2443B |
500 sheet
stapler stacker paper output assembly |
|
Q2442-67902 |
500-Sheet
paper stacker assembly - Provides additional output capacity for the
LaserJet 4200/4250 or 4300/4350 printers - Mounts on top of the printer |
|
Q2442B |
500-sheet
paper stacker output assembly |
|
Pickup Assembly |
RM1-0034-070CN |
Paper
pickup assembly - Paper pickup drive assembly for Tray 1/Multipurpose
input tray |
|
Power Supply |
RM1-1070-040CN |
Power
supply assembly - For LaserJet 4240/4250/4350 - For 110V to 127VAC
operation |
|
RM1-1071-000CN |
Power
supply assembly - For LaserJet 4240/4250/4350 - For 220V to 240VAC
operation |
|
Rod |
RC1-0268-000CN |
Metal rod
between external power button and switch on power supply board |
|
Roller |
RM1-0037-020CN |
Paper
feed/seperation roller assembly - Black rubber roller on a blue plastic
cylinder |
|
RM1-0036-000CN |
Paper
pickup roller - Gray spongy rubber roller on a white cylinder and 24
tooth white gear on one side |
|
RM1-1110-000CN |
Transfer
roller assembly - Long black spongy roller - Transfers charge to paper |
|
RL1-0019-000CN |
Tray 1
pickup roller - D shaped roller under envelope cover |
|
Roller Assembly |
RM1-0026-040CN |
Paper
delivery assembly - Paper output roller assembly |
|
RM1-0012-020CN |
Paper feed
roller assembly |
|
RM1-1098-030CN |
Registration roller assembly |
|
RM1-1098-000CN |
Registration roller assembly |
|
Screw |
XA9-1420-000CN |
M3 pan
head phillips screw with captive flat and split-lock washers - 8mm long |
|
RC1-0266-000CN |
M3 stepped
shaft screw |
|
XA9-1500-000CN |
M3
pan-head Phillips screw with flat washer - 8mm long |
|
XA9-1503-000CN |
M3 truss
head (Flanged) phillips screw (Black oxide finish) - 6mm long |
|
Sensor |
RC1-0748-000CN |
Paper size
sensor block - Spring loaded block which activates the paper size sensor
fingers |
|
RM1-0285-000CN |
Paper
sensor assembly - Includes the support tray with the paper stack surface
and paper detection sensors, associated sensor flags, and cable assembly |
|
WG8-5624-000CN |
Photo-sensor (TLP1241) - Sensor flag activated |
|
RM1-0294-000CN |
Paper size
sensor assembly - Includes the three size fingers, micro-switch assembly
and housing assembly |
|
RM1-0041-020CN |
Tray 2
paper size tray sensing assembly - White plastic tray size sensing
fingers and microswitch assembly |
|
Solenoid |
RK2-0269-000CN |
Paper
pickup solenoid |
|
RK2-0276-000CN |
Tray 1
solenoid - Engages Tray 1 pickup roller |
|
Spring |
RC1-0213-000CN |
Compression spring - Provides pressure for paper pickup and feed rollers
in Tray 2 pickup assembly |
|
RC1-0307-000CN |
Grounding
leaf spring - Attaches to right side bottom of top cover assembly |
|
RC1-0198-000CN |
Tension
spring - Provides tension for lifter drive assembly |
|
RC1-0061-000CN |
Torsion
spring |
|
RC1-0254-000CN |
Torsion
spring - Provides tension for Tray 2 kicker - Mounts on Tray 2 guide
assembly |
|
RC1-1923-000CN |
Torsion
spring - Provides tension for paper sensor flag |
|
Staple Cartridge |
Q3216-60500 |
Staple
cartridge assembly - Has 1,000 staples - For the staple module assembly
in the 500-sheet stacker/stapler unit |
|
Q3216A |
Staple
cartridge assembly - Has 1,000 staples - For the staple module assembly
in the 500-sheet stacker/stapler unit |
|
Stop |
RC1-3303-000CN |
Detent
stop for 500 sheet feeder |
|
Support |
RC1-0344-020CN |
Fan cover
- Metal support strap that main cooling fan fastens to - For fan FN101,
main cooling fan on right left side of printer |
|
Switch |
WC4-5139-000CN |
Top cover
interlock access switch |
|
Tab |
RC1-3304-000CN |
Tray
number display - Changeable tray number tab for optional 500 sheet
feeder |
|
Thermistor |
RK2-0359-000CN |
Environment temperature detection thermistor - Detects ambient air
temperature to determine length of time for fuser warm up. |
|
Torque Limiter |
RC1-0335-000CN |
Torque
limiter - Torque limiter for 500 sheet paper feeder pickup roller |
|
Tray |
RM1-0005-020CN |
Drop down
Tray 1 - Includes adjustable paper width guide assembly |
|
RM1-0248-000CN |
Paper
(delivery) tray assembly - Holds the output from the 500-sheet paper
stacker (or stacker/stapler) assembly - Snap-locks on the front of the
assembly |
|
RM1-1088-070CN |
500-sheet
tray/cassette - This is only the tray, does not include feeder or frame
that tray goes into |
|
Tray Assembly |
Q2440-67903 |
500-sheet
paper feeder and tray/cassette - This is the assembly frame and tray
that the printer sits on top of |
|
Q2444-67902 |
1500 sheet
paper tray and feeder assembly for LaserJet 4200/4300 series printers |
|
RM1-1097-040CN |
Tray 1
paper input assembly |
