|
KEYWORD |
PART
NUMBER |
DESCRIPTION |
|
Arm |
RC1-5062-000CN |
Center paper retainer arm - Plastic
piece with two pivot pins and two flat retaining fingers - Helps to
prevent paper from re-entering the printer from the top paper output
tray - Mounts on top of the fusing assembly |
| RC1-5096-000CN |
Left (viewed from front) paper
retainer arm - Plastic piece with two pivot pins and five flat
retaining fingers - Helps to prevent paper from re-entering the
printer from the top paper output tray - Mounts on top of the fusing
assembly |
| RC1-5097-000CN |
Right (viewed from front) paper
retainer arm - Plastic piece with two pivot pins and five flat
retaining fingers - Helps to prevent paper from re-entering the
printer from the top paper output tray - Mounts on top of the fusing
assembly |
| Belt |
RM1-1885-020CN |
Electrostatic Transfer Belt (ETB)
assembly - Includes the assembly structure, ETB belt, drive roller,
and four transfer rollers - Wide belt assembly which feeds the paper
past each toner cartridge - Mounts to the lower front of the print
engine frame |
| Cable |
Q6456-60101 |
Flat Flexable Cable (FFC) assembly -
Connects between the DC controller board (J109) and the formatter
board (J702) |
|
Cable (Interface) |
8121-0712 |
Universal Serial Bus (USB) interface
cable (Black) - Type 'A' connector to type 'B' connector - 0.6m
(24-inches) long - USB 2.0 compliant |
| 8121-0868 |
Universal Serial Bus (USB) interface
cable (Black) - Type 'A' connector to type 'B' connector - 1.83m
(6.0ft) long |
| C6518A |
Universal Serial Bus (USB) interface
cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| C6520A |
Universal Serial Bus (USB) interface
cable - Type 'A' connector to type 'B' connector - 3.0m (9.8ft) long |
| C2392A |
Universal serial bus (USB) interface
cable - Type 'A' connector to type 'B' connector - 5.0m (16ft) long |
|
Cartridge |
Q6000-67902 |
HP Color LaserJet smart Black print
cartridge - Will print approximately 2,500 pages based on a 5% print
density |
| Q6000A |
HP Color LaserJet smart Black print
cartridge - Will print approximately 2,500 pages based on a 5% print
density |
| Q6001-67902 |
HP Color LaserJet smart Cyan print
cartridge - Will print approximately 2,000 pages based on a 5% print
density |
| Q6001A |
HP Color LaserJet smart Cyan print
cartridge - Will print approximately 2,000 pages based on a 5% print
density |
| Q6002-67902 |
HP Color LaserJet smart Yellow print
cartridge - Will print approximately 2,000 pages based on a 5% print
density |
| Q6002A |
HP Color LaserJet smart Yellow print
cartridge - Will print approximately 2,000 pages based on a 5% print
density |
| Q6003-67902 |
HP Color LaserJet smart Magenta
print cartridge - Will print approximately 2,000 pages based on a 5%
print density |
| Q6003A |
HP Color LaserJet smart Magenta
print cartridge - Will print approximately 2,000 pages based on a 5%
print density |
| Control Panel |
RM1-1983-000CN |
Control panel assembly - Includes
the support frame, four push buttons, and PC board - Mounts on the
front upper right on the printer |
|
Cover |
RC1-5173-000CN |
Top cover/output tray - Has molded
in 'U' shaped tray for face-down paper output - Mounts to the top
towards the rear of the printer |
| RC1-5174-000CN |
Top cover front section - Flat 'C'
shaped dark plastic cover which surrounds the face-down output paper
tray - Mounts on the top towards the front on the printer (above the
control panel) |
| RC1-5176-000CN |
Top front sub-cover / support
structure - 'C' shaped Gray plastic cover which surrounds the
face-down output paper tray and has a cutout for the control panel
assembly - Mounts on the top towards the front on the printer |
| RC1-5178-000CN |
Upper inside cover - Protects the
control panel PC board and cable from damage - Mounts on the under
side of the top front sub-cover / support structure |
| RC1-5183-000CN |
Left side cover assembly - Plastic
cover with molded air louvers |
| RC1-5184-000CN |
Bottom left cover - Small cover with
molded hand grip - Covers the input paper cassette (tray 2) area on
the printer |
| RC1-5188-000CN |
Bottom right cover - Small cover
with molded-in hand grip - Covers the input paper cassette (tray 2)
area on the printer |
| RC1-5200-000CN |
Dust cover - Small 'U' shaped cover
that covers the end of the paper cassette tray that protrudes out of
the rear of the printer - Mounts just below the metal rear cover
(for tray 2) and on the optional tray 3 base assembly (two used if
tray 3 is installe |
| RC1-5227-000CN |
Rear cover - Stamped metal cover -
Mounts on the upper rear of the printer |
| RC1-5227-020CN |
Rear cover - Stamped metal cover -
Mounts on the upper rear of the printer |
| RM1-1858-000CN |
Right side cover assembly - Plastic
cover with molded-in air louvers and cutout for the USB and RJ-45
LAN connectors |
| Door |
RM1-1856-000CN |
Front door assembly - Pull-down
cover that provides access for changing the toner cartridges |
| Feed Assembly |
RM1-1923-000CN |
Manual paper feed assembly (tray 1)
- Includes the curved plastic feed structure with width adjustment
arms - Mounts on the front of the 250-sheet paper cassette tray
frame - (For tray 1 and 2 combined paper tray only) |
|
Fusing Assembly |
RM1-1820-080CN |
Fusing Assembly - Bonds toner to
paper with heat - For 110VAC to 127VAC (+/- 10%) operation - Mounts
in the upper front of the printer |
| RM1-1821-080CN |
Fusing Assembly - Bonds toner to
paper with heat - For 220VAC to 240VAC (+/- 10%) operation - Mounts
in the upper front of the printer |
|
Interface
(Product) |
J6035C |
HP JetDirect 175X external print
server - Has on 4-pin USB connector and one RJ-45 LAN connector -
Connects to the printer via the USB port and the network via the LAN
port |
| J6072A |
HP bt1300 Bluetooth wireless printer
adapter - Allows for wireless printing from Bluetooth enabled PCs,
PDAs, phones, and cameras - Connects to either the parallel or USB
port on the printer - Includes the power module and power cord |
| J7942A |
HP JetDirect en3700 external print
server - Fast Ethernet Internet connector for sharing peripherals
with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0
printer port and one RJ-45 10/100 Base-TX connector - Includes
software and power module |
| Manual |
Q6455-90930 |
Color LaserJet 2600n service manual |
|
PC Board |
Q5965-67901 |
Formatter board - Mounts on the rear
of the print engine frame (to the left of the DC controller board) |
| RM1-1975-090CN |
DC controller board assembly -
Mounts on the rear of the print engine frame (to the right of the
formatter board) |
| Pad |
RM1-1922-000CN |
Separation pad assembly - Includes
the spring loaded separation pad in a holder assembly - Mounts in
the front center of the 250-sheet paper tray - Same part used in
both tray 2 and optional tray 3 |
|
Power Cord |
8121-0564 |
Power cord (Black) - 2.0m (6.6ft)
long - Has straight (F) C13 receptacle (For 240V in India) |
| 8121-0729 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
220V in Argentina) |
| 8121-0731 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
220V in Europe) |
| 8121-0732 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
220V in Israel) |
| 8121-0733 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
220V in Denmark) |
| 8121-0734 |
Power cord (Black) - 18 AWG, three
conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For
220V in Brazil and Thailand) |
| 8121-0735 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
220V in Chile) |
| 8121-0736 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
100V in Japan) |
| 8121-0737 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
240V in India and South Africa) |
| 8121-0738 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
220V in Switzerland) |
| 8121-0739 |
Power cord (Black) - 18 AWG, three
conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For
240V in Singapore, Hong Kong and the U.K.) |
| 8121-0740 |
Power cord (Black) - 3-wire, 18 AWG,
1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the
USA, Canada, Mexico, and Taiwan) |
|
Printer |
Q6455-67056 |
Replacement Color LaserJet 2600n -
Complete printer with cables, toner cartridge, software, etcetera,
in retail packaging - For 110VAC to 127VAC (+/- 10%) operation (For
sale in the Americas only) |
| Q6455-69056 |
Refurbished Color LaserJet 2600n -
Complete refurbished printer with cables, toner cartridge, software,
etcetera, in retail packaging - For 110VAC to 127VAC (+/- 10%)
operation (For sale in the Americas only) |
| Q6455-69013 |
Exchange Color LaserJet 2600n -
Printer (including formatter board) ONLY - Packaged in a brown box -
For 110VAC to 127VAC (+/- 10%) operation |
| Q6455-67055 |
Replacement Color LaserJet 2600n -
Complete printer with cables, toner cartridge, software, etcetera,
in retail packaging - For 220VAC to 240VAC (+/- 10%) operation
|
| Q6455-69055 |
Refurbished Color LaserJet 2600n -
Complete refurbished printer with cables, toner cartridge, software,
etcetera, in retail packaging - For 220VAC to 240VAC (+/- 10%)
operation |
| Q6455-69014 |
Exchange Color LaserJet 2600n -
Printer (including formatter board) ONLY - Packaged in a brown box -
For 220VAC to 240VAC (+/- 10%) operation |
| Roller |
RC1-5440-000CN |
Paper pickup roller (D-shaped
roller) - Picks up media from the paper input tray - Clips in the
holder on the paper pickup shaft in the paper feeder assembly - Same
part used in the paper feeder assemblies for both tray 2 and
optional tray 3 |
| Spring |
RC1-5147-000CN |
Grounding spring - Mounts on the
left inside wall of the print engine frame assembly towards the
bottom (on the left cassette tray guide) |
| Tray |
RM1-1945-080CN |
250-sheet paper cassette tray
assembly - |
|
Tray Assembly |
Q6459-67902 |
Optional paper tray assembly
(Optional tray 3) - Adds an additional 250-sheet paper tray on the
bottom of the printer - Includes the tray base and feeder assembly,
and paper cassette tray |
| Q6459A |
Optional paper tray assembly
(Optional tray 3) - Adds an additional 250-sheet paper tray on the
bottom of the printer - Includes the tray base and feeder assembly,
and paper cassette tray |
| RM1-1859-020CN |
Tray extender assembly - Provides
for additional support for the paper exiting the top of the printer
- Has pull-out extender for longer paper - Mounts to the top rear of
the printer |
| RM1-1916-080CN |
250-sheet paper cassette tray
assembly with a single-sheet manual feed slot on the front - |
