|
Adjuster |
RM1-1318-000CN |
Duplexer paper size adjuster assembly -
Includes the adjustment lever, holder bracket, and the two drive gears
in a spring loaded arm - Mounts on the top right side of the duplexer
assembly |
|
Arm |
RC1-3544-020CN |
Cam arm - Dogleg shaped arm - Disengages
the toner cartridge drive gear when the toner cartridge access door is
opened - Mounts between the access door and the main drive gear assembly |
|
RC1-3551-000CN |
Tag arm - Spring loaded arm that holds the
memory contact and cable (contacts the memory in the toner cartridge) -
Mounts in the tag arm holder (Towards the right end of the laser/scanner
support shelf) |
|
Body |
RM1-1294-000CN |
250-sheet (tray 2) body assembly -
Includes everything except for the tray front cover assembly |
|
Bushing |
RC1-3665-000CN |
Bushing/shaft retainer (Plastic) - Small
plastic cylinder with four nubs that twist - Locks into the side frame -
Holds the top output bin roller in the top of the fusing assembly (two
used) |
|
RB2-2896-000CN |
Shaft bushing/retainer - Left side pickup
roller support bushing - Mounts on and retains the left end of the
pickup roller shaft |
|
RB2-2895-000CN |
Shaft bushing/retainer - Right side pickup
roller support bushing - Mounts on and retains the right end of the
pickup roller shaft |
|
Cable (Interface) |
C2950A |
IEEE 1284 Bi-Tronics parallel cable -
DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B)
- 2.0m (6.6ft) long |
|
C2951A |
IEEE-1284 Bi-Tronics parallel cable -
DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B)
- 3.0m (9.8ft) long |
|
8121-0712 |
Universal Serial Bus (USB) interface cable
(Black) - Type 'A' connector to type 'B' connector - 0.6m (24-inches)
long - USB 2.0 compliant |
|
C6518A |
Universal Serial Bus (USB) interface cable
- Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
|
Cartridge |
Q5949-67901 |
Ultra-precise black toner cartridge
(economy) - Will print approximately 2,500 pages based on a 5% print
density |
|
Q5949A |
Ultra-precise black toner cartridge
(economy) - Will print approximately 2,500 pages based on a 5% print
density |
|
Q5949X |
Ultra-precise black toner cartridge (high
capacity) - Will print approximately 6,000 pages based on a 5% print
density |
|
Control Panel |
RM1-1312-000CN |
Control panel assembly - Includes the
control panel bezel, 'Go' and 'Cancel' buttons, LED light pipe, and
sheild plate (PC board NOT included) - Mounts on the right side of the
top cover |
|
Cover |
RM1-1293-000CN |
Tray front cover assembly - Mounts to the
front of tray 2 |
|
RM1-1307-020CN |
Front cover set - Includes the toner
cartridge access door, single sheet priority input slot door, front
cover (between tray 2 and the priority input slot), and the noise
absorber |
|
RC1-3812-000CN |
Left side printer cover - Has moled-in
bezel for the interface port connectors (On the formatter board) |
|
RM1-1308-020CN |
Rear cover assembly - Includes the rear
cover bezel and fold down face-up (or straight through) paper output
tray (Tray is NOT sold separately) |
|
RM1-1308-000CN |
Rear cover assembly - Includes the rear
cover bezel and fold down face-up (or straight through) paper output
tray (Tray is NOT sold separately) |
|
RC1-3814-000CN |
Right side cover assembly - Has molded-in
air intake louvers |
|
RC1-3800-000CN |
Top cover assembly - Has face-down paper
output tray molded into it |
|
Door |
RC1-3819-000CN |
Rear access door assembly - For adding or
removing the duplexer assembly from the printer - Mounts to the lower
portion of the rear cover assembly |
|
Duplexer |
RM1-1313-000CN |
Duplexer assembly - Includes the paper
guide plate, output guide rollers, and size change assembly - Slides in
the opening on the lower rear of the printer |
|
Fan |
RK2-0428-000CN |
Fan assembly - Includes the small cooling
fan and cable - Mounts in the fan housing / air flow guide on the right
side plate assembly |
|
Flag |
RC1-3472-000CN |
Paper sensor flag - Cylindrical plastic
piece with a flag on each end (One senses the paper, the other activates
the photo-sensor) - Mounts on the paper pickup drive shaft |
|
Fusing Assembly |
RM1-1289-080CN |
Fusing assembly - Bonds toner to paper
with heat - For 110V to 127VAC operation - Mounts to the upper rear of
the print engine assembly |
|
RM1-2337-000CN |
Fusing assembly - Bonds toner to paper
with heat - For 220V to 240VAC operation - |
|
Gear |
RU5-0332-000CN |
19-tooth gear (White plastic) - Mounts on
the end of the top output bin delivery roller |
|
RU5-0331-000CN |
29-tooth gear (White plastic) - Main drive
gear for the fusing assembly - Mounts on the right end of the fusing
assembly |
|
Gear Assembly |
RM1-1301-000CN |
Double gear assembly - Includes the gear
body, inset gear (both with a toothless area) and compression spring -
For driving the paper pickup roller - Mounts on the right side plate
assembly |
|
RM1-1302-000CN |
Duplexing gear assembly - Includes the
normal and reverse rotation gear assemblies, and idler gear mounted on a
support bracket - Drives the top output bin and rear rollers - Mounts on
the upper rear corner of the right side plate assembly |
|
RM1-1299-020CN |
Main drive gear assembly - Large plate
with ten drive gears and the single sheet priority drive clutch (SL2) -
Mounts on the right side plate assembly |
|
RM1-1303-000CN |
Normal rotation gear assembly - Includes
the internal/external geared body, two planetary gears, outer gear with
shaft, and the black ratchet gear - Mounts in the duplexing gear
assembly |
|
RM1-1304-000CN |
Reverse rotation gear assembly - Includes
the internal/external geared body, two planetary gears, outter gear with
shaft, and the white ratchet gear - Mounts in the duplexing gear
assembly |
|
Guide |
RC1-3539-020CN |
Cartridge guide - Upper left side toner
cartridge guide |
|
RC1-3731-020CN |
Cable guide - L-shaped plastic guide with
offset fingers - For routing cables through the printer - Mounts on the
back of the main drive gear assembly |
|
Holder |
RC1-3537-000CN |
Fan Holder assembly - Plastic fan bezel
with airflow ports - Directs airflow to the various parts of the printer
- Mounts on the right side plate assembly |
|
RC1-3550-000CN |
Memory tag arm holder - Supports the tag
arm assembly (toner cartridge memory reader) - Mounts towards the right
end of the laser/scanner support shelf |
|
Interlock |
RM1-1320-030CN |
Interlock switch assembly (Has mounting
clips for the wireless LAN PC board for the LaserJet 1320nw) - Disables
the printer when the left side cover is removed - Mounts in the upper
front corner of the left side plate assembly |
|
Laser/Scanner |
RM1-1470-000CN |
Laser/scanner assembly - Mounts on the
laser/scanner support shelf |
|
RM1-1470-050CN |
Laser/scanner assembly - Mounts on the
laser/scanner support shelf |
|
Link |
RM1-1321-000CN |
Shutter link assembly - Spring loaded link
which engages the shutter on the laser/scanner assembly (blocking the
laser beam) when the toner cartridge access door is opened - Mounts on
the left front of the laser/scanner support shelf |
|
Manual |
Q5927-90965 |
LaserJet 1160 and LaserJet 1320 series
combined service manual |
|
5851-1468 |
LaserJet printer family paper
specification guide |
|
Memory (DIMM) |
C9121-67901 |
128MB, 100-pin SDRAM DIMM memory module -
(Part of C9121A) |
|
C7843-67901 |
16MB, 100-pin SDRAM DIMM memory module -
(Part of C7843A) |
|
Q1887-67901 |
64MB, 100-pin SDRAM DIMM memory module -
(Part of Q1887A) |
|
Memory (Product) |
C9121A |
128MB, 100-pin SDRAM DIMM memory module |
|
C7843A |
16MB, 100-pin SDRAM DIMM memory module |
|
C7845A |
32MB, 100-pin SDRAM DIMM memory module |
|
Q1887A |
64MB, 100-pin SDRAM DIMM memory module |
|
Motor |
RK2-0418-000CN |
DC stepper motor assembly - Drives all
rollers and fusing assembly via the main drive gear assembly - Mounts on
the inside rear of the right side plate assembly |
|
Nameplate/Logo |
Q5927-40001 |
HP LaserJet 1320 Nameplate - Mounts in the
recess on the toner cartridge access door |
|
PC Board |
RM1-1262-000CN |
Duplexer control board - Small PC board
that mounts just above and to the left of the fan on the right side
plate assembly |
|
RM1-1242-030CN |
Engine control unit (ECU) PC board -
Control and power supply board for the printer (For 110V to 127V
operation) - Does NOT includes the power cord connector or power switch
- Mounts in the bottom of the printer |
|
RM1-1300-030CN |
Engine control unit (ECU) PC board
assembly - Includes the PC board, bottom pan, and standoffs (For 110V to
127V operation) - Does NOT includes the power cord connector or power
switch - Mounts in the bottom of the printer |
|
RM1-1462-000CN |
Engine control unit (ECU) PC board
assembly - Includes the PC board, bottom pan, and standoffs (For 220V to
240V operation) - Does NOT includes the power cord connector or power
switch - Mounts in the bottom of the printer |
|
RM1-1243-030CN |
Engine controlunit (ECU) PC board -
Control and power supply board for the printer (For 220V to 240V
operation) - Does NOT includes the power cord connector or power switch
- Mounts in the bottom of the printer |
|
CB355-67901 |
Formatter board assembly - Contains the
logic circuitry, the parallel interface and connector, and the USB
interface and connector - Mounts towards the rear on the left side plate
assembly |
|
Q3696-67901 |
Formatter board assembly - Contains the
logic circuitry, the parallel interface and connector, and the USB
interface and connector - Mounts towards the rear on the left side plate
assembly |
|
Pad |
RM1-1298-000CN |
Tray 2 sparation pad assembly - Includes
the pad on a spring loaded arm in a holder frame - Mounts toward the
front of the tray |
|
Paper Feeder |
RM1-1286-000CN |
Paper feed guide assembly - Support
structure to guide the paper into the fusing assembly - Ribbed plastic
frame with metal guide plate - Mounts in front of the fusing assembly
(below the toner cartridge) |
|
Power Cord |
8120-6813 |
POWER CORD (DOVE GRAY) - 2.3M (7.5FT) LONG
- HAS STRAIGHT (F) RECEPTACLE (FOR 240V IN THE UNITED KINGDOM, HONG
KONG, SINGAPORE, MALAYSIA) |
|
8120-6809 |
POWER CORD-UK |
|
8120-6800 |
Power cord (Flint Gray) - 16 AWG, 2.3m
(7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) |
|
8120-6811 |
Power cord (Flint Gray) - 17 AWG, 2.3m
(7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe,
Saudi Arabia, South Africa, India, and Korea) |
|
8120-6814 |
Power cord (Flint Gray) - 17 AWG, 2.3m
(7.5ft) long - Has straight (F) receptacle (for 220V in Denmark) |
|
8120-6815 |
Power cord (Flint Gray) - 17 AWG, 2.3m
(7.5ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
|
8120-6812 |
Power cord (Flint Gray) - 18 AWG, 2.3m
(7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada,
Mexico, Philippines, and Taiwan) |
|
Printer |
Q5927-69055 |
Refurbished LaserJet 1320 - Complete
refurbished printer with cables, toner cartridge, software, etcetera, in
retail packaging - For 220VAC to 240VAC (+/- 10%) operation (For sale in
Europe and Asia Pacific only)
REQUIRES RETURN OF DEFECTIVE PART(New part = Q5927-67055) |
|
Retainer |
RM1-1306-000CN |
Paper retainer assembly - Bracket assembly
with two flapper levers - Keeps paper in the top output bin from sliding
back into the printer - Mounts to the top of the fusing assembly |
|
Roller |
RC1-3470-000CN |
Idler roller (plastic) - Free wheeling
roller - Two used - Mounts on each side of the paper pickup roller (two
used) |
|
Roller Assembly |
RL1-0540-000CN |
Paper pickup roller - Includes the D
shaped pickup roller spindle with the rubber tire - Does NOT include the
idler rollers on each side of the pickup roller |
|
RM1-1281-070CN |
Registration roller assembly - Includes
the frame, the two roller assemblies, and the upper transfer guide -
Mounts in the front middle of the print engine assembly |
|
RL1-0527-000CN |
Top output bin delivery roller assembly -
Plastic rod with four rubber wheels (two narrow and two wide) - Mounts
on top of the fusing assembly |
|
RM1-1471-000CN |
Transfer roller assembly - Transfers
static charge to the media being printed on - Mounts in front of the
paper feed guide assembly |
|
Sensor |
RM1-1283-000CN |
Top sensor assembly - Includes the bracket
and flags for the top of page detection sensor (PS912), and paper width
detection sensor (PS913) - Mounts behind the registration roller
assembly |
|
Solenoid |
RK2-0424-000CN |
24V DC Solenoid (SL1) - Engages the pickup
roller gear/clutch assembly for tray 2 (250-sheet tray) - Mounts on the
right side plate assembly |
|
RK2-0420-000CN |
24V DC Solenoid (SL3) - Engages the
'normal' and 'reverse' ratchet gears on the duplex drive gear assembly -
Mounts on the right side plate assembly |
|
Spacer |
RA0-1128-000CN |
Printed circuit board spacer - Mounts
between the engine control PC board and the metal support pan (two used) |
|
Spring |
RU5-2335-000CN |
Compression spring - Applies downward
pressure on the memory tag arm to contact the toner cartridge |
|
RU5-2323-000CN |
Compression spring - Applies pressure to
the idler roller arm (two used) - Mounts in the middle front of the
print engine assembly |
|
Switch |
RM1-1249-000CN |
Power receptacle and switch cable assembly
- Includes the power cord receptacle, power switch, and cable assembly -
Mounts in the lower rear corner of the right side plate assembly |
|
Tray Assembly |
Q5931A |
Optional 250-sheet paper tray assembly -
Includes base assembly and removable paper cassette - Adds an additional
bottom paper tray (tray 3) to the LaserJet |
